RSKM-NPT-NXD Waterproof metal cable gland na may maraming core
RSKM Series Metal Cable Gland Coding Regulation
| Code | Paglalarawan ng Code | Paglalarawan |
| RSKM RSKM1 RSKM2 | metal cable gland (cable fastener:plastic claw+rubber seal) metal cable gland (cable fastener：full-through rubber seal lang ）
| RSKM1: May teeth-type half-through seal RSKM2:Na may full-through na seal na may uri ng ngipin |
| D RA EMV.SP EMV.SC D-EMV XXXX | Double lock cable gland Right-angle na cable gland Spring shielding cable gland EMC Cable gland Dobleng lock shielding cable gland Karaniwang cable gland na walang code | RSKM-D-M16A..... RSKM-RA-M16A..... RSKM-EMV.SP-M16A..... RSKM-EMV.SC-M16A..... RSKM-D-EMV-M16A..... RSKM-M16A..... |
| M P N G | Sukatan na Thread pamantayan ng Alemanya American standard pamantayang British | RSKM-M16A..... RSKM-P9A..... RSKM-N1/2A..... RSKM-G1/4A.... |
| 16 | Pagtutukoy ng Thread | |
| *2.0 | Pitch ng Sukatan na thread na walang code kung nakumpirma sa talahanayan. | RSKM-M16 *1.5 A.....RSKM-M16A.... RSKM-M16*2.0A..... Kailangan |
| A B C | Saklaw ng cable ng pagkakakilanlan
| RSKM-M16A..... Saklaw ng kable:4-8 RSKM-M16B..... Saklaw ng kable:2-6 RSKM-M16C..... Saklaw ng cable:5-10 |
| 2x6(NxD) N1xD1+N2xD2 | Multi-entry na may parehong spec ng cable. Multi-entry na may iba't ibang spec ng cable.Single-entry na walang code | RSKM-M16A-3X6.. D Ø6mmx3pcs RSKM-M16A-1X2+2X6..... D Ø2mmx1pcs, D Ø 6mmx2pcs |
| L | Napahaba ang thread Mga karaniwang walang code | RSKM-M16A-1X2+2X6-LC..... RSKM-M16A-1X2+2X6-C.... |
| C AL | Brass, Nickel plated AL haluang metal | RSKM-M16A-1X2+2X6-C..... RSKM-M16A-1X2+2X6-AL... |
| O | O-singsing | RSKM-M16A-1X2+2X6-CO... |
| M | Nut (Opsyonal) | RSKM-M16A-1X2+2X6-OM |
Paraan ng Pagpili
1、Pakikumpirma ang Cable Material
2、Pakikumpirma ang cable range acc.sa diameter ng cable
3、Pakikumpirma ang thread spec.acc.sa diameter ng bore through
RSKM-NPT-NXD Waterproof metal cable gland na may maraming core
● Material: Brass nickel-Plated
● Plastic na materyal: PA6 o PA66
● Mga Seal: Silicone, EPDM o NBR
● Temperatura：-40℃-100℃，maikling termino120℃
● Mga Tampok ng Produkto: Kumokonekta nang mas maayos gamit ang O-ring groove.Pinoprotektahan ang koneksyon na ligtas sa pamamagitan ng paggamit ng pinahusay na mga proteksiyon na seal
| Item No. | Spec ng Thread. | materyal | Saklaw ng Cable(Φ) | Thread OD(AG) | Haba ng Thread (GL) | taas (H) | Wrench (SW1) mm | Spanner (SW2) mm | Pag-install sukat ng butas mm
| Kundisyon |
| RSKM-M16A-4×1.4-C-OM | M16×1.5 | CU | 4×1.4 | 16 | 7 | 21 | 20 | 20 | Ф16.2-Ф16.4 | D |
| RSKM-M16A-2×3-C-OM | M16×1.5 | CU | 2×3 | 16 | 7 | 21 | 20 | 20 | Ф16.2-Ф16.4 | D |
| RSKM-M18A-2×3-C-OM | M18×1.5 | CU | 2×3 | 18 | 7 | 21 | 20 | 20 | Ф18.2-Ф18.4 | D |
| RSKM-M18A-4×3-C-OM | M18×1.5 | CU | 4×3 | 18 | 7 | 21 | 20 | 20 | Ф18.2-Ф18.4 | D |
| RSKM-M20A-3×2.5-C-OM | M20×1.5 | CU | 3×2.5 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M20A-6×3-C-OM | M20×1.5 | CU | 6×3 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M22A-2×6-L8-C-OM | M22×1.5 | CU | 2×6 | 22 | 8 | 24 | 24 | 24 | Ф22.2-Ф22.4 | D |
| RSKM-M25A-4×6-C-OM | M25×1.5 | CU | 4×6 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-3×7-L8-C-OM | M25×1.5 | CU | 3×7 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-2×8-C-OM | M25×1.5 | CU | 2×8 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-H-M25A-3×7+1×8.5-C | M25×1.5 | CU | 3×7+1×8.5 | 25 | 15 | 26 | 34 | 33 | Ф25.2-Ф25.4 | D |
| RSKM-M32A-6×6.5-C-OM | M32×1.5 | CU | 6×6.5 | 32 | 10 | 31 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M32A-4×9-L10-C-OM | M32×1.5 | CU | 4×9 | 32 | 10 | 33 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M32A-2×4+1×8.5-C-OM | M32×1.5 | CU | 2×4+1×8.5 | 32 | 10 | 31 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M40A-5×9-C-OM | M40×1.5 | CU | 5×9 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M40A-7×9-C-OM | M40×1.5 | CU | 7×9 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M40A-2×15-C-OM | M40×1.5 | CU | 2×15 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M63A-6×12-C-OM | M63×1.5 | CU | 6×12 | 63 | 11 | 38 | 67 | 67 | Ф63.3-Ф63.5 | D |
| RSKM-M63A-4×19-C-OM | M63×1.5 | CU | 4×9 | 63 | 11 | 38 | 67 | 67 | Ф63.3-Ф63.5 | D |
| RSKM-M16A-4×1.4-C-OM | M16×1.5 | CU | 4×1.4 | 16 | 7 | 21 | 20 | 20 | Ф16.2-Ф16.4 | D |
| RSKM-M16A-2×3-C-OM | M16×1.5 | CU | 2×3 | 16 | 7 | 21 | 20 | 20 | Ф16.2-Ф16.4 | D |
| RSKM-M18A-2×3-C-OM | M18×1.5 | CU | 2×3 | 18 | 7 | 21 | 20 | 20 | Ф18.2-Ф18.4 | D |
| RSKM-M18A-4×3-C-OM | M18×1.5 | CU | 4×3 | 18 | 7 | 21 | 20 | 20 | Ф18.2-Ф18.4 | D |
| RSKM-M20A-3×2.5-C-OM | M20×1.5 | CU | 3×2.5 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M20A-6×3-C-OM | M20×1.5 | CU | 6×3 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M22A-2×6-L8-C-OM | M22×1.5 | CU | 2×6 | 22 | 8 | 24 | 24 | 24 | Ф22.2-Ф22.4 | D |
| RSKM-M25A-4×6-C-OM | M25×1.5 | CU | 4×6 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-3×7-L8-C-OM | M25×1.5 | CU | 3×7 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-2×8-C-OM | M25×1.5 | CU | 2×8 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-H-M25A-3×7+1×8.5-C | M25×1.5 | CU | 3×7+1×8.5 | 25 | 15 | 26 | 34 | 33 | Ф25.2-Ф25.4 | D |
| RSKM-M32A-6×6.5-C-OM | M32×1.5 | CU | 6×6.5 | 32 | 10 | 31 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M32A-4×9-L10-C-OM | M32×1.5 | CU | 4×9 | 32 | 10 | 33 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M32A-2×4+1×8.5-C-OM | M32×1.5 | CU | 2×4+1×8.5 | 32 | 10 | 31 | 40 | 40 | Ф32.2-Ф32.4 | D |
| RSKM-M40A-5×9-C-OM | M40×1.5 | CU | 5×9 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M40A-7×9-C-OM | M40×1.5 | CU | 7×9 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M40A-2×15-C-OM | M40×1.5 | CU | 2×15 | 40 | 10 | 37 | 50 | 50 | Ф40.3-Ф40.5 | D |
| RSKM-M63A-6×12-C-OM | M63×1.5 | CU | 6×12 | 63 | 11 | 38 | 67 | 67 | Ф63.3-Ф63.5 | D |
| RSKM-M63A-4×19-C-OM | M63×1.5 | CU | 4×9 | 63 | 11 | 38 | 67 | 67 | Ф63.3-Ф63.5 | D |
FAQ
Q：Anong mga sertipikasyon ang naipasa ng aming kumpanya?
F：ISO 9001:2018 / ISO45001:2018 / ISO14001:2015
T: Anong kaligtasan ang kailangan ng ating mga produkto?
F：Patuloy na kumonekta, Kaligtasan sa pagganap ng elektrikal
Q：May MOQ ba ang aming mga produkto?Kung oo, ano ang minimum na dami ng order?
F：MOQ ang magiging min.dami ng packing.
Q：Ano ang aming mga katanggap-tanggap na paraan ng pagbabayad?
F：TT,L/C
Q: Ano ang oras ng trabaho natin?
F：8 am - 17 pm mula Lunes hanggang Biyernes.
Q：Ano ang mga pangunahing merkado na sinasaklaw namin?
F：European mark, Asia Market, Middle east Market at American market.
